NANUK 930 For Ronin SC2

Your DJI™ Ronin-SC 2 gets the maximum level of protection with this protective case. The foam is pre-cut for your Ronin-SC 2 and the smart design ensures all the delicate parts remain in place and properly organized.

Get a commercial quote
  • Interior dimensions (L x W x H): 457 mm x 330 mm x 175 mm
  • Exterior dimensions (L x W x H): 503 mm x 406 mm x 193 mm
  • Material: Lightweight NK-7 resin
  • Waterproof (IP67): Yes
  • Warranty: Conditional lifetime warranty
  • Airline check-in: Yes
  • Airline cabin carry-on: Yes
  • *Check with your airline carrier before travelling
  • Certification Lifetime Warranty
  • Certification Military Approved
  • Certification Waterproof IP67 Rated
  • Certification Impact Resistant
Interior dimensions (L x W x H) 457 mm x 330 mm x 175 mm
18.0″ x 13.0″ x 6.9″
Exterior dimensions (L x W x H) 503 mm x 406 mm x 193 mm
19.8″ x 16.0″ x 7.6″
Weight 8.21 lb | 3.72 kg
Lid depth 2.1″ | 53 mm
Base depth 4.8″ | 121 mm
Material Lightweight NK-7 resin
Internal volume 0.93 cu.ft (26.3 L)
Max buoyancy 65 lb | 29.5 kg
Temperature range Min -20°F (-29°C ) | Max 140°F (60°C)
Padlock Holes Diameter 0.300"
Water resistant (IP67) Yes
Warranty Conditional lifetime warranty
Airline check-in Yes
Airline cabin carry-on Yes
*Check with your airline carrier before travelling

No revisions on file.